Loading..
CARREZ Standard PB32 (OP=OP)
29 kg
 

This planter with square corners looks great in gardens with clean lines. The sleek, double-turned edge gives it a sturdy appearance. The CARREZ is also ideal for use as a divider in hospitality venues.

The CARREZ fibreglass planter gives gardens a modern look. The fibreglass planter is intended for outdoor use. By default, it is not waterproof. The planter is supplied in standard colours. Other colours can be ordered for an additional cost, so there is a CARREZ fibreglass planter to match every design scheme.

Our fibreglass planter is made of high-quality reinforced fibreglass. This makes the planter sturdy. The reinforcement has been extended into the corners, which prevents splitting. The fibreglass is dyed through, and the planter will retain its colour.

SPECIFICATIONS:

  • 5-year guarantee.
  • Fibreglass planters are frost-resistant and strengthened to prevent warping.
  • Lightweight and very strong.
  • Finished with a double-turned edge.
  • The fibreglass has a thickness of 3 mm.
  • Includes a channel for drainage and circles for drilling drainage holes.
  • We also supply professional maintenance products.
  • Products should be unpacked immediately upon receipt to release any moisture trapped inside the packaging. This moisture can cause stains that are difficult to remove.
  • Always drill drainage holes in the base of the planter. The base has circles for drilling. These circles are connected by a drainage channel. After drilling the drainage holes, install the overflow pipe. This will ensure that no excess water remains in the planter.
  • Fibreglass planters should always be installed on a flat surface. Do not place the planter on beams, stones, etc.
  • The planter is not suitable for moving once filled.
  • Clean at least twice a year with our ADEZZ cleaner/protector. Do not use a pressure washer and/or scouring pad. This damages the coating.

PLANTING ADVICE:

  • Insert the overflow pipes into the drainage holes prepared for them.
  • Cover the bottom of the planter with about 10 cm of hydro pellets.
  • Place a permeable anti-root membrane over the drainage material.
  • Cover the membrane with soil suitable for your chosen plants.
  • Keep the drainage holes clear so that excess water can run off.